First, anti-static

Steel-wood office furniture is generally sprayed with anti-static powder on the surface to prevent static electricity. Most desks are generally panel type, and there is no anti-static technology on the surface. Therefore, the anti-static of office furniture in autumn needs to rely on itself. The easiest and most convenient way to get rid of static electricity is to wipe with a semi-moist rag. A rag is usually placed on the table. You can wipe with wet water during dry season to effectively remove static electricity and dust from the desktop.

The root cause of static electricity is because of the dry air in the room, so the best way to prevent it from appearing is to install a humidifier in the room to effectively adjust the indoor temperature balance, reduce the generation of static particles, and keep dust and hair, debris, etc. from floating in the room. Aerial to avoid attaching to the table.

Second, maintain temperature and humidity to prevent cracking/rusting

The humidity and temperature of the office should be kept at a certain value, i.e. it should not be too humid or too dry. If the board is too wet, it may swell. Over a long period of time, boards will rot and metal parts will rust; too much room temperature can cause boards to deform, crack, and paint. Maintaining a certain humidity and temperature in the room is also beneficial to human health.

Third, avoid sudden changes in cold and heat, resulting in the deformation of office furniture

Indoor ventilation can replace the stagnant air in the room, keep the air fresh and refresh the body. However, in the fall, the humidity of the air decreases and most of the blows are dry and cold. This will cause the water in the office furniture to accelerate and evaporate. Problems such as clogging, discoloration, fiber brittleness, etc. may occur. If the furniture is affected by the autumn air, then in the winter, it will definitely expand the influence, leading to the qualitative change of the office furniture.

Fourth, daily cleaning and maintenance are in place

The most important thing in office furniture maintenance is to remove dust frequently. The dust that is most likely to accumulate in wooden office furniture not only affects the appearance and beauty of the desk, but also accelerates the aging speed of wooden office furniture. In the fall, there is less water in the air, and a lot of the heating in the office, the water in the boards is gone. When cleaning office furniture, be careful not to scratch the surface of the office furniture.