A look: the material of office furniture should be environmentally friendly

In terms of material, office furniture can be divided into: solid wood office furniture, panel office furniture, steel office furniture, plastic office furniture, fabric office furniture, rattan office furniture, etc. No matter what kind of office furniture it is, the primary guarantee must be health. When purchasing office furniture, you can check the relevant quality inspection report to ensure that the office furniture you buy is healthy and environmentally friendly.

Second smell: the smell of office furniture should not be irritating

Environmentally friendly custom office furniture products should have no irritating odor and do not irritate the eyes, nose and throat. If you smell office furniture and find that the smell is irritating, you need to pay attention. The heavier the pungent odor, the higher the formaldehyde content may be. However, some office furniture is still substandard even if the taste is not heavy. Therefore, before purchasing, be sure to ask the office furniture factory to show the relevant environmental protection certificate.

Three touches: Office furniture paint should be smooth

After smelling the smell, you also need to take a closer look at the paint. Paint is also closely related to the health of the human body. You need to touch it with your hand, you need to pay attention to whether the paint is smooth, whether the paint is wrinkled, whether there is paint peeling. Generally, the office furniture of the regular office furniture factory is very elegant in terms of paint.

Four inspections: office furniture should be flat on all four feet

Whether you are buying an office furniture sofa or a filing cabinet, the flatness of the four feet of the office furniture is a must and a prerequisite. When looking at office furniture, you can give it a shake, or sit on it and try it out. If there is a sound, pay attention, such office furniture may not be strong.

Five inspections: the moisture content of office furniture is the same as the local

Because the moisture content of office furniture wood is affected by its origin, and office furniture with a moisture content higher than 1% of the average moisture content in the area of use will appear cracking, deformation, falling apart, warping and other phenomena, so it is best to buy dry The office furniture produced by the office furniture manufacturers with good craftsmanship is not important whether it is produced locally or in other places. The key is that its moisture content should be consistent with the average moisture content of the area where it is used.

Six views: whether the edge of office furniture is flat

If the sealing edge is uneven, it means that the inner material is wet, and the sealing edge will fall off in a few days. The edge should also be rounded, not straight edges and right angles. Edges sealed with wooden strips are prone to moisture or cracking. For office furniture inlaid with plywood, the strips are nailed with nails. Pay attention to whether the nail holes are flat and whether the color of the nail holes is the same as that of other places. Usually the nail holes are sealed with putty. Pay attention to whether the putty is bulging. If it is bulging, it means no, and the putty will gradually fall out from the inside. Whether the edge banding is flat is also an important factor to investigate an office furniture manufacturer. Small office furniture manufacturers with poor quality use manual edge banding. If the quality of the plate is still too poor with precision sawing, and the plate edge has a gap, special attention should be paid when purchasing.